Home > News > Content
Products Categories
Contact Us
Add: Intersection of S302 and Mitsui Road, Botou, Cangzhou, Hebei Province
Mob: +8618233760625
Tel: +86-317-8188885
Fax: +86-317-8266866
E-mail: info@haidejx.com
Attention To The Use Of Shearing Machine
Nov 01, 2018

1, start the shearing machine machine for several cycles of idling, to ensure that under normal circumstances, test shear thickness of the sheet, from thin to thick.Ensure the user is familiar with the shearing machine performance. 

2, test shear when the thickness of different plates must be adjusted to different blade clearance. If the corresponding blade gap is not adjusted, the blade durability is affected. 

3, Shearing machine in the shearing process open the pressure gauge switch, observe the oil pressure value, shear 12mm plate pressure should be less than 20MPa.This remote regulator NO9, the factory pressure to adjust the 20-22mpa, the user must abide by this regulation, not to cut ultra-specified material surface to increase pressure, resulting in machine damage. 

4. Sound balance during operation.Shearing machine If there is a murmur, should stop check.

5, Shearing machine operation when the fuel tank to increase the temperature of <60 more than when the shutdown rest.

Related News

Learn More Information About Our Products Know More
Copyright © Botou Haide Machinery Manufacturing Co.,Ltd All Rights Reserved.