Pressure tile machine equipment in the production process will inevitably appear such or such problems, the most common is the problem of color plate, once the deviation will affect the mechanical production efficiency and product qualification rate, so we must know how to correct these errors, after a long period of research, groping, We have come up with a way to adjust this problem: if the device board to the right, you need to use a block of iron to the left corner, or to the side of the roller, the first number of axes to flatten the first axis, the top of the roller should be aligned with the following rollers, if the above leveling, the following should be flat, The uniform and symmetrical rollers are not variable. If not, first the color steel pressure tile machine before and after two rows of the equivalent of the four corners from the large frame adjustment to the top of the height of the same position, and then from the first row to the last row, find a line straightened, check if the lower axis is on a horizontal level, the lower axis left and right side of the horizontal adjustment. Color steel tile Equipment first row and the last row to find a good symmetry point, and then tighten both sides of the lock mother, in the middle of the center runner Front and back pull a straight line, the upper and lower shaft clearance adjustment, you can follow the straight line adjustment machine.
In fact, plate-run deviation of the remedial method is the need for our long-term production and testing, different run-off direction has a different remedy, but there is a point to note that whether it is mechanical roller or other parts need to align, only the two sides to maintain symmetry, the shape of the product production will be structured.
Press-pad machine equipment can also be called roll-type cold-bending molding, that is, in a row of tandem forming mill, contact through the metal plate and metal strip, in order to make it curved, the plate is processed into the required section shape of the plastic processing method. Roll type Cold bending molding (color steel tile equipment) used for bicycle rims, umbrella skeleton manufacturing.
debugging of color steel tile equipment
1, first the color steel pressure tile machine equipment before and after two lines of the four corners from the top of the axis of the big frame exactly the height of the same, and then from the first row to the last row, find a line straightened, check, whether the lower axis in a straight line, the lower axis left and right side of the level of adjustment.
2, the color steel pressure tile machine equipment first row and the last row to find a good center, and then tighten both sides of the lock mother, in the middle of the center of the wheel before, after pulling a straight line, the upper and lower shaft clearance adjustment, you can follow the straight line adjustment machine.
3, Color steel Press tile machine equipment-pressure plate run deviation debugging method, such as the board to run to the right, pad left corner (feed rack), or fall on the right side of the bottom flat (the first few axes run failing several axes bottom flat, the upper axis with the bottom axis falling.
Add: Intersection of S302 and Mitsui Road, Botou, Cangzhou, Hebei Province
Please fill in your mailbox information