In order to prolong the service life of the machine, we need to carefully carry out the daily maintenance, the steps are as follows:
1, according to the requirements of the Oil cup lubrication and artificial lubrication points to refuel.
2. According to the parameters stipulated in the unwinding machine, the thickness of the coil plate is 20mm, the maximum length is 2500mm, and the yield limit of the coil material is less than 250MPA.
3, after the power supply, the next roll of the positive and negative two direction and the upper roller movements, check the movement has no normal card dead phenomenon.
4, strictly according to the coil plate processing procedures and operating methods to operate, in the upper roller lifting to the limit position, to pay great attention to the safe operation of the equipment.
5, when the main drive shut down, can be carried on the upper roller lift, reversing the return of the bearing and the tilt of the roll up.
6, in the course of operation, if the detection of irregular noise, shock and other abnormal phenomenon, should immediately stop inspection.
7, the operation of the personnel to coordinate with each other, follow the direction of the head of the Roll board, no password, prohibit the start of the machine.
8, the coil board operation should pay great attention to the hand is pressed and steel plate together.
9. When lifting the steel plate or reel with the crane, be careful not to collide with the machine.After the completion of the work of the unwinding machine, the completion of the material to make the site clear, and good equipment maintenance work, timely shut down the power.
Add: Intersection of S302 and Mitsui Road, Botou, Cangzhou, Hebei Province
Please fill in your mailbox information